Cisco D9854-I User Manual

Chapter 5 Web GUI Setup and Monitoring
180
For PowerVu Streams:
- Std - In standard mode, if a program is not authorized, even if some services
are not scrambled, the whole program will not be authorized.
- Open - In open mode, if a program is not authorized, any services in the
program that are not scrambled will still be available.
For Non-PowerVu (CAM) streams:
- Std - In standard mode, if a program's CA system is not supported by the
CAM, the channel is not authorized.
- Open - In open mode, all the program's CA systems are validated by the
CAM. The channel is always authorized.
11 Click Apply.
Viewing the SI Receive Status
The SI Receive Status area displays all the current SI Receive settings. It also
displays the source of last tuning and the last Preset Number activated. The Service
List From section displays the current settings of the allowed services (BAT, NIT,
SDT, PAT).

Cisco D9854-I Specifications

General

Brand	Cisco
Model	D9854-I
Category	Receiver
Language	English