D9854/D9854-I Advanced Program Receiver
 4:2:0 HD MPEG-4 AVC and MPEG-2 1080i and 720p decoding
 4:2:0 SD MPEG-4 AVC and MPEG-2 decoding
 Aspect ratio conversion (4:3, 16:9, 14:9) with Active Format Descriptor (AFD)
control for SD programs
 AFD support for down-conversion of HD programs with aspect ratio conversion
 User-configurable redundant ASI, SDI, or HD-SDI outputs
 SDI or HD-SDI video output with embedded audio
 Closed captioning support for EIA-608 and EIA-708
 MPEG and Dolby Digital audio decoding
 DVB or Imitext subtitling
 Four audio outputs providing either two stereo pairs or four mono channels of
balanced, audio, each with the ability to use part of the output for applications
such as second audio program (SAP), cue tones, etc.
 Utility data up to 38.4 kbps using RS-232
 Uplink addressable decoder output control, including vertical blanking interval
(VBI) data, audio routing, DPI, and ASI output)
 Fingerprint trigger
 Field upgradeable software and security
 Simple Network Management Protocol (SNMP) for setup, control, and
monitoring
 Front panel liquid crystal display (LCD) for control and monitoring
 Web browser interface for easy setup, control, and monitoring
 DVB-VBI and SCTE-127 support
 CAM Interface software
 Dual-tone multifrequent (DTMF) cue tone and cue trigger outputs for
advertisement insertion
 Digital program mapping providing uplink control for service replacements in
blackout areas
 Cisco Live Event Controller support
 On Screen Display support on baseband output.
 Satellite Disaster Recovery support with Cisco PowerVu Network Center uplink
control (Release 12.5 or later)
To Next Page
Loading...
Need help?
General
