Cisco D9854-I - Page 313

Configuring System Settings
289
Note: The FTP Password is not retained in the transcoder. You must re-enter the
password before initiating the backup or restore operation.
6 In the FTP Port Number field, enter the port number of the FTP server used to
store the backup/restore file. You can enter a port number in the range from 1 to
65535.
7 Click the Export Device Settings & Transport Network Information radio
button to save user settings and tuning information to the backup file. Click the
Export User Device Settings Only radio button to save user settings to the
backup file.
8 Click Export to save the settings to a backup file. Click Import to retrieve the last
backed up file.
Viewing the Backup/Restore Status
The following table displays the Settings File Backup/Restore/Operation History
information:
Status
Description
Last Backup File Name
Name of the file to use.
Backup Time Stamp
Date and time of the last successful backup file saved.
Last Restored File Name
Name of the last file that was restored.
Restore Time Stamp
Date and time of the last successful restore.
Operation Status
Status of the current backup operation (Inprogress, Pass, or
Fail).
Detailed Operation Status
Detailed processing step for tracking backup progress.
Percentage Complete
Percentage of backup function completed.