Cisco D9854-I - Page 373

349
Warning
Message
Type
Message
Cause/Remedy
Description
ID
Transport Error
Set
Transport Rate
Error: FPGA
Overflow
Cause: Uplink settings
may have changed since
setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and/or
drop programs not
needed for downstream
devices. Contact your
(uplink) service provider
to verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
42000
Transport Error
Clear
Continuity Count
Error Cleared
–
Trap expires after 30
seconds.
42000
Transport Error
Clear
Buffer Overflow
Cleared
–
Trap expires after 30
seconds.
42000
Transport Error
Clear
Transport Error
Indicator Cleared
–
Trap expires after 30
seconds.
42000
Transport Error
Clear
Transport Rate
Error: FPGA
Overflow
Cleared
–
Trap expires after 30
seconds.
42000
CI Status
Set
Different CA
Systems in
Top/Bottom
Slots
Cause: Different CA
systems are used in the
slots.
Remedy: Replace the CA
cards to use the same
CA system.
Different CA Systems
in Top/Bottom slots.
42500
CI Status
Clear
OK
–
–
42500
Video Format
Mismatch
Set
Video format
mismatch
–
Video Format
Mismatch.
43000
Video Format
Mismatch
Clear
Video format
match
–
–
43000