Cisco Firepower 1010 User Manual

firepower(local-mgmt)# shutdown
This command will shutdown the system. Continue?
Please enter 'YES' or 'NO': yes
INIT: Stopping Cisco Threat Defense......ok
Step 3 Monitor the system prompts as the firewall shuts down. You will see the following prompt:
System is stopped.
It is safe to power off now.
Do you want to reboot instead? [y/N]
Step 4 You can now unplug the power to physically remove power from the chassis if necessary.
What's Next?
To continue configuring your threat defense, see the documents available for your software version at Navigating
the Cisco Firepower Documentation.
For information related to using the device manager, see Cisco Firepower Threat Defense Configuration Guide
for Firepower Device Manager.
Cisco Firepower 1010 Getting Started Guide
115
Threat Defense Deployment with the Device Manager
What's Next?

Cisco Firepower 1010 Specifications

General

Brand	Cisco
Model	Firepower 1010
Category	Firewall
Language	English