Cisco Firepower 1010 User Manual

Install the firewall. See the hardware installation guide.Pre-Configuration
Review the Network Deployment, on page 8.Pre-Configuration
Cable the Device (6.5 and Later), on page 10
Cable the Device (6.4), on page 12.
Pre-Configuration
Power On the Firewall, on page 13.Pre-Configuration
(Optional) Check the Software and Install a New Version, on page 13CLI
Cisco Firepower 1010 Getting Started Guide
7
Threat Defense Deployment with the Management Center
End-to-End Procedure

Cisco Firepower 1010 Specifications

General

VPN Throughput	500 Mbps
Concurrent Sessions	100, 000
Maximum Concurrent Sessions	200, 000
Ports	8 x 1 GE
Humidity	10% to 90% non-condensing
Form Factor	Desktop
Flash Memory	8 GB
Interfaces	8 x RJ-45
Power Supply	Internal
Dimensions (H x W x D)	4.44 x 21.59 x 17.27 cm
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20 to 70°C
Memory	4 GB