Cisco IE-3000-8TC Hardware Installation Guide

2-9
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 2 Switch Installation
Adding Modules to the Switch
Step 3 Push up the upper module latches (at the top of the switch and the module). See Figure 2-4. Push down
the lower module latches (at the bottom of the switch and the module).
Figure 2-4 Pushing the Module Latches Up
Step 4 Align the connectors on the switch and the module, and slide the switch and the module together to make
the connection. See
Figure 2-5.
Figure 2-5 Connecting the Switch and the Module
Step 5 Push the upper module latches down and the lower latches up. See Figure 2-6.
201824
201825

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes