Cisco IE-3000-8TC Hardware Installation Guide

A-2
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Appendix A Technical Specifications
Ta b l e A-2 Cisco IE 3000 Series Technical Specifications
Environmental Ranges
Storage temperature –40 to 185°F (–40 to 85°C)
Operating humidity 5 to 95% (noncondensing)
Operating shock 20 g at 11 ms
Operating altitude Up to 13,000 ft (3962 m)
Storage altitude Up to 40,000 ft (12,192 m)
Power Requirements
DC input voltage Cisco IE-3000-8TC and Cisco IE-3000-4TC:
• Range: 18 to 60 VDC
• Nominal: 24 or 48 VDC
The DC-input power supply is an SELV circuit, and it can only
be connected to another SELV circuit.
Maximum DC input current Cisco IE-3000-8TC and Cisco IE-3000-4TC
• 1 A @ 48 VDC
• 2 A @ 24 VDC
Power consumption Cisco IE-3000-8TC, Cisco IEM-3000-8TM. and
Cisco IEM-3000-8FM: 35 W (maximum)
Physical Dimensions
Weight Cisco IE-3000-8TC: 4.4 lb (2 kg)
Cisco IE-3000-4TC: 4.4 lb (2 kg)
Cisco IEM-3000-8FM 3.2 lb (1.45 kg)
Cisco IEM-3000-8TM 2.05 lb (0.93 kg)
Dimensions
(W x D x H)
Cisco IE-3000-8TC and Cisco IE-3000-4TC:
6 x 4.4 x 5.8 in. (15.4 x 11.2 x 14.7 cm)
Cisco IEM-3000-8TM and Cisco IEM-3000-8FM:
3.6 x 4.4 x 5.8 in. (9.1 x 11.2 x 14.7 cm)
Note Width includes the cosmetic end-caps. Height does not
include the panel mount brackets. Depth is the distance
from the rail.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes