Cisco IE-3000-8TC Hardware Installation Guide

Contents
vii
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Where to Go Next B-59
APPENDIX C Cable and Connectors C-1
Connector Specifications C-1
10/100 Ports C-1
Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices C-1
Connecting to 1000BASE-T Devices C-1
100BASE-FX Ports C-3
SFP Module Ports C-3
Dual-Purpose Ports C-4
Console Port C-4
Cable and Adapter Specifications C-4
SFP Module Cable Specifications C-4
Two Twisted-Pair Cable Pinouts C-5
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports C-6
Crossover Cable and Adapter Pinouts C-7
Identifying a Crossover Cable C-7
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports C-7
Adapter Pinouts C-8
APPENDIX D Configuring the Switch with the CLI-Based Setup Program D-1
Accessing the CLI from the Console Port D-1
Entering the Initial Configuration Information D-2
IP Settings D-2
Completing the Setup Program D-2
I NDEX

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes