EasyManua.ls Logo

Cisco IR1101 - IRM-1100 Expansion Unit

Cisco IR1101
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Design SpecificationDescription
-40° to 140°F (-40° to 60°C) in a sealed NEMA cabinet with no airflow-40° to
158°F (-40° to 70°C) in a vented cabinet with 40 LFM of air-40° to 167°F (-40°
to 75°C) in a forced air enclosure with 200 LFM of air(type tested at +85°C for
16 hours)NOTE: This product has been safety certified up to 60°C maximum
ambient.-500 to 5,000 feet. Derate max operating temperature 1.5°C per 1000
feet.
Operating Temperature and Altitude on the Base
IR1101 with WP7600 Series Modems.
Note: See EM74XX Modem Specifications, on
page 79 for the EM74XX Series Modems.
10 95%Humidity
Nominal voltage: 12V to 48V DCMin/Max voltage: 9.6V to 60V DC inputInput Voltage
12V - 0.72A24V - 0.36A59.8V - 0.17ATypical Current
Without LTE Pluggable: Typical 7.7W, Maximum 10WWith LTE Pluggable:
Typical 10W, Maximum 13W
Typical/Maximum Power Consumption
IRM-1100 Expansion Unit
The following table lists the Expansion Unit specifications:
Table 24: Cisco IRM-1100 Specifications
Design SpecificationDescription
13.3(h) x 12.5(d) x 5.8(w) cm (5.22" x 4.92" x 2.27")Dimensions
1.6 lbs.Weight
IP 30Ingress Protection Rating
Non-condensing Relative Humidity: 5% to 95%Humidity
UL 60950-1, 2nd edition; CAN/CSA C22.2 No. 60950-1, 2nd edition, EN
60950-1, 2nd edition; CB to IEC 60950-1, 2nd edition with all group differences
and national deviations.
Standard Safety Certifications
-40° to 140°F (-40° to 60°C) in a sealed NEMA cabinet with no airflow-40° to
158°F (-40° to 70°C) in a vented cabinet with 40 LFM of air-40° to 167°F (-40°
to 75°C) in a forced air enclosure with 200 LFM of air(type tested at +85°C for
16 hours)NOTE: This product has been safety certified up to 60°C maximum
ambient.-500 to 5,000 feet. Derate max operating temperature 1.5°C per 1000
feet.
Operating Temperature and Altitude on the
Expansion IRM-1100 with WP7600 Series
Modems.
Note: See EM74XX Modem Specifications, on
page 79 for the EM74XX Series Modems.
10 95%Humidity
IR1101 Industrial Integrated Services Router Hardware Installation Guide
78
Technical Specifications
IRM-1100 Expansion Unit

Table of Contents

Other manuals for Cisco IR1101

Related product manuals