Cisco ME 3400 Command Reference

Contents
iv
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
boot system 2-27
channel-group 2-28
channel-protocol 2-32
class 2-34
class-map 2-36
clear ip arp inspection log 2-38
clear ip arp inspection statistics 2-39
clear ip dhcp snooping 2-40
clear ipc 2-42
clear ipv6 dhcp conflict 2-43
clear l2protocol-tunnel counters 2-44
clear lacp 2-45
clear mac address-table 2-46
clear mac address-table move update 2-47
clear pagp 2-48
clear policer cpu uni-eni counters 2-49
clear port-security 2-50
clear rep counters 2-52
clear spanning-tree counters 2-53
clear spanning-tree detected-protocols 2-54
clear vmps statistics 2-56
conform-action 2-57
cpu traffic qos cos 2-59
cpu traffic qos dscp 2-63
cpu traffic qos precedence 2-68
cpu traffic qos qos-group 2-71
define interface-range 2-73
delete 2-75
deny (ARP access-list configuration) 2-76
deny (IPv6 access-list configuration) 2-78
deny (MAC access-list configuration) 2-83
dot1x default 2-86
dot1x host-mode 2-87
dot1x initialize 2-89
dot1x max-reauth-req 2-90

Cisco ME 3400 Specifications

General

Category	Switch
Rack Mountable	Yes
Jumbo Frame Support	Yes
Authentication Method	RADIUS, TACACS+
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400
Layer	Layer 2
MAC Address Table Size	8000 entries
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	VLAN support, IGMP snooping, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Memory	128 MB
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 24.2 cm
Routing Protocol	Static routing