Cisco ME 3400 Command Reference

Contents
v
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
dot1x max-req 2-92
dot1x port-control 2-93
dot1x re-authenticate 2-95
dot1x reauthentication 2-96
dot1x supplicant force-multicast 2-97
dot1x system-auth-control 2-98
dot1x test eapol-capable 2-99
dot1x test timeout 2-100
dot1x timeout 2-101
dot1x violation-mode 2-103
duplex 2-104
errdisable detect cause 2-106
errdisable detect cause small-frame 2-108
errdisable recovery 2-110
errdisable recovery cause small-frame 2-112
ethernet evc 2-113
ethernet lmi 2-114
ethernet lmi ce-vlan map 2-116
ethernet oam remote-failure 2-118
ethernet uni 2-120
ethernet uni id 2-122
exceed-action 2-123
flowcontrol 2-125
interface port-channel 2-127
interface range 2-129
interface vlan 2-131
ip access-group 2-133
ip address 2-136
ip arp inspection filter vlan 2-138
ip arp inspection limit 2-140
ip arp inspection log-buffer 2-142
ip arp inspection trust 2-144
ip arp inspection validate 2-146
ip arp inspection vlan 2-148
ip arp inspection vlan logging 2-149

Cisco ME 3400 Specifications

General

Category	Switch
Rack Mountable	Yes
Jumbo Frame Support	Yes
Authentication Method	RADIUS, TACACS+
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400
Layer	Layer 2
MAC Address Table Size	8000 entries
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	VLAN support, IGMP snooping, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Memory	128 MB
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 24.2 cm
Routing Protocol	Static routing