Send document comments to nexus7k-docfeedback@cisco.com
4-22
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 4 Installing a Cisco Nexus 7018 Chassis
Installing the Front Door and Air Intake Frame
Figure 4-14 Attaching the Right Door Stopper
Step 3 Position the hinge bracket (700-28491-01) at the bottom of the cable management frame and the chassis
as shown in Figure 4-15.
1 Right door stopper identified with an R on the
bottom of the base.
3 Screw holes on the right side of the cable
management frame.
2 Two M3x10 screws that fasten the stopper to
the right side of the cable management frame.
To Next Page
Loading...
