Send document comments to nexus7k-docfeedback@cisco.com
9-60
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 9 Replacement Procedures
Replacing the Cable Management Frame on the Cisco Nexus 7018 Chassis
Figure 9-31 Positioning the Top Cover with the Upper Cable Management Assemblies and the
Switch Chassis
Step 7
Use four M4x8 pan-head screws to loosely fasten the top cover to the chassis (see Callout 1 in
Figure 9-32).
1 Alignment pins 2 Alignment holes
To Next Page
Loading...
