Cisco Nexus 7000 Series - Page 312

Send document comments to nexus7k-docfeedback@cisco.com
A-8
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Appendix A Technical Specifications
Power Specifications for the Cisco Nexus 7000 Series Switches
4 power supply units
1
9600 W 7200 W 4800 W 4800 W
Single input per power supply unit
220-V input
1 power supply unit 3000 W — — —
2 power supply units 6000 W 3000 W — —
3 power supply units 9000 W 6000 W — —
4 power supply units
1
12,000 W 9000 W — —
110-V input
1 power supply unit 1200 W — — —
2 power supply units 2400 W 1200 W — —
3 power supply units 3600 W 2400 W — —
4 power supply units
1
4800 W 3600 W — —
1. A fourth power supply unit can be added to only the Cisco Nexus 7018 switch. The Cisco Nexus 7010 holds up to
three power supply units.
Table A-9 Power Availability for 6-kW AC Power Supply Units (continued)
Combined
Mode
Power
Supply
Redundancy
Mode
Input Source
Redundancy
Mode
Full
Redundancy
Mode
Table A-10 Power Availability for 7.5-kW AC Power Supply Units
Combined
Mode
Power
Supply
Redundancy
Mode
Input Source
Redundancy
Mode
Full
Redundancy
Mode
Dual inputs per power supply unit
220-V and 220-V inputs
1 power supply unit 7500 W — 3750 W —
2 power supply units 15,000 W 7500 W 7500 W 7500 W
3 power supply units 22,500 W 15,000 W 11,250 W 11,250 W
4 power supply units
1
30,000 W 22,500 W 15,000 W 15,000 W
Single input per power supply unit
220-V input
1 power supply unit 3750 W — — —
2 power supply units 7500 W 3750 W — —
3 power supply units 11,250 W 7500 W — —
4 power supply units
1
15,000 W 11,250 W — —