Figure 14: Front ID Door
Step 2 Add the grounding cable to the left side of the front ID door to connect the top and bottom metal plates.
Step 3 Tighten the screw to 7 in-lb (0.79 N-m) of torque to provide proper bonding.
Step 4 Install another grounding cable to the right side of the front ID door.
The following figure shows the location of the 2 grounding cables.
Cisco Nexus 7706 Hardware Installation Guide
OL-31330-0134
Installing the Switch Chassis
Grounding the Front ID Door
To Next Page
Loading...
