Figure 15: Grounding Cable Location on the Front ID Door
Grounding cable2Grounding cable1
Step 5 Apply the star ring terminal end of the grounding cable to the front ID door.
Step 6 Connect the other round terminal of the grounding cable to the ground port on the chassis as shown in Figure 12. Tighten
the M4 screw to 9 to 12 in-lb (1.01 to 1.35 N-m) of torque.
Cisco Nexus 7706 Hardware Installation Guide
35OL-31330-01
Installing the Switch Chassis
Grounding the Front ID Door
To Next Page
Loading...
