Cisco Nexus 9000 Series - Enabling RADIUS Accounting for 802.1 X Authentication

PurposeCommand or Action
Copies the running configuration to the startup
configuration.
(Optional) copy running-config startup-config
Example:
Step 6
switch(config)# copy running-config startup-config
Enabling RADIUS Accounting for 802.1X Authentication
You can enable RADIUS accounting for the 802.1X authentication activity.
Before you begin
Enable the 802.1X feature on the Cisco NX-OS device.
SUMMARY STEPS
1. configure terminal
2. dot1x radius-accounting
3. exit
4. (Optional) show dot1x
5. (Optional) copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Step 1
switch# configure terminal
switch(config)#
Enables RADIUS accounting for 802.1X. The default is
disabled.
dot1x radius-accounting
Example:
Step 2
switch(config)# dot1x radius-accounting
Exits configuration mode.exit
Example:
Step 3
switch(config)# exit
switch#
Displays the 802.1X configuration.(Optional) show dot1x
Example:
Step 4
switch# show dot1x
Copies the running configuration to the startup
configuration.
(Optional) copy running-config startup-config
Example:
Step 5
switch# copy running-config startup-config
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
202
Configuring 802.1X
Enabling RADIUS Accounting for 802.1X Authentication