Cisco Nexus 9000 Series - Configuring the Control Plane Service Policy

PurposeCommand or Action
Example:
switch(config)# show policy-map type control-plane
Copies the running configuration to the startup
configuration.
(Optional) copy running-config startup-config
Example:
Step 10
switch(config)# copy running-config startup-config
Related Topics
Configuring a Control Plane Class Map, on page 473
Configuring the Control Plane Service Policy
You can configure one or more policy maps for the CoPP service policy.
When you try to change the CoPP policy and apply a custom CoPP policy, it is configured in the hardware
as non-atomic, and the following system message appears:
This operation can cause disruption of control traffic. Proceed (y/n)? [no] y
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT24-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT23-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT21-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT25-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT26-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT22-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT4-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
Note
Before you begin
Ensure that you have configured a control plane policy map.
SUMMARY STEPS
1. configure terminal
2. control-plane
3. [no] service-policy input policy-map-name
4. exit
5. (Optional) show running-config copp [all]
6. (Optional) copy running-config startup-config
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
477
Configuring Control Plane Policing
Configuring the Control Plane Service Policy