Cisco Nexus 9000 Series - Additional References for Rate Limits

The following example shows how the SPAN egress rate limiter might be in conflict with sFlow:
switch(config)# hardware rate-limiter span-egress 123
Warning: This span-egress rate-limiter might affect functionality of sFlow
switch(config)# show hardware rate-limiter span-egress
Units for Config: packets per second (kilo bits per second for span-egress)
Allowed, Dropped & Total: aggregated since Module: 1
R-L Class Config Allowed Dropped Total
+----------------+----------+--------------+--------------+----------------+
L3 glean 100 0 0 0
L3 mcast loc-grp 3000 0 0 0
access-list-log 100 0 0 0
bfd 10000 0 0 0
exception 50 0 0 0
fex 3000 0 0 0
span 50 0 0 0
dpss 6400 0 0 0
span-egress 123 0 0 0
<<configured
Additional References for Rate Limits
This section includes additional information related to implementing rate limits.
Related Documents
Document TitleRelated Topic
Cisco NX-OS Licensing Guide
Cisco NX-OS licensing
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
499
Configuring Rate Limits
Additional References for Rate Limits