Cisco Nexus 9000 Series - Configuring AAA Accounting Methods for 802.1 X

Configuring AAA Accounting Methods for 802.1X
You can enable AAA accounting methods for the 802.1X feature.
Before you begin
Enable the 802.1X feature on the Cisco NX-OS device.
SUMMARY STEPS
1. configure terminal
2. aaa accounting dot1x default group group-list
3. exit
4. (Optional) show aaa accounting
5. (Optional) copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Step 1
Configures AAA accounting for 802.1X. The default is
disabled.
aaa accounting dot1x default group group-list
Step 2
The group-list argument consists of a space-delimited list
of group names. The group names are the following:
• radius—For all configured RADIUS servers.
• named-group—Any configured RADIUS server group
name.
Exits configuration mode.exit
Step 3
Displays the AAA accounting configuration.(Optional) show aaa accounting
Step 4
Copies the running configuration to the startup
configuration.
(Optional) copy running-config startup-config
Step 5
Example
This example shows how to enable the 802.1x feature:
switch# configure terminal
switch(config)# aaa accounting dot1x default group radius
switch(config)# exit
switch# show aaa accounting
switch# copy running-config startup-config
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
203
Configuring 802.1X
Configuring AAA Accounting Methods for 802.1X