Cisco Nexus 9000 Series - Verifying the 802.1 X Support for VXLAN EVPN

PurposeCommand or Action
dot1x max-reauth-req 2
dot1x timeout quiet-period 60
dot1x timeout re-authperiod 3600
dot1x timeout tx-period 1
dot1x timeout server-timeout 30
dot1x timeout ratelimit-period 0
dot1x timeout supp-timeout 30
dot1x timeout inactivity-period 0
dot1x mac-auth-bypass
interface Ethernet1/33
dot1x host-mode multi-auth
dot1x pae authenticator
dot1x port-control auto
no dot1x re-authentication
dot1x max-req 1
dot1x max-reauth-req 2
dot1x timeout quiet-period 60
dot1x timeout re-authperiod 3600
dot1x timeout tx-period 1
dot1x timeout server-timeout 30
dot1x timeout ratelimit-period 0
dot1x timeout supp-timeout 30
dot1x timeout inactivity-period 0
dot1x mac-auth-bypass
Verifying the 802.1X Support for VXLAN EVPN
To display the 802.1X Support for VXLAN ENPN configuration information, enter one of the following
commands:
PurposeCommand
Displays dot1x running configuration.show running-config dot1x all
Displays the interface status.show dot1x all summary
Displays the default settings.show dot1x
Displays additional interface detail.show dot1x all
Example of show running-config dot1x all command
switch# show running-config dot1x all
!Command: show running-config dot1x all
!No configuration change since last restart
!Time: Thu Sep 20 10:22:58 2018
version 9.2(2) Bios:version 07.64
feature dot1x
dot1x system-auth-control
dot1x mac-move deny
interface Ethernet1/1
dot1x host-mode multi-auth
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
207
Configuring 802.1X
Verifying the 802.1X Support for VXLAN EVPN