EasyManua.ls Logo

Cisco Nexus 9000 Series - Copying the Copp Best Practice Policy

Cisco Nexus 9000 Series
562 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DETAILED STEPS
PurposeCommand or Action
Applies the CoPP best practice policy.[no] copp profile [strict | moderate | lenient | dense]
Step 1
Example:
You cannot disable CoPP. If you enter the no form of this
command, packets are rate limited at 50 packets per seconds.
switch(config)# copp profile moderate
Displays the CoPP status, including the last configuration
operation and its status. This command also enables you to
(Optional) show copp status
Example:
Step 2
verify that the CoPP best practice policy is attached to the
control plane.
switch(config)# show copp status
Displays the CoPP configuration in the running
configuration.
(Optional) show running-config copp
Example:
Step 3
switch(config)# show running-config copp
Related Topics
Changing or Reapplying the Default CoPP Policy Using the Setup Utility, on page 490
Copying the CoPP Best Practice Policy
The CoPP best practice policy is read-only. If you want to modify its configuration, you must copy it.
SUMMARY STEPS
1. copp copy profile {strict | moderate | lenient | dense} {prefix | suffix} string
2. (Optional) show copp status
3. (Optional) show running-config copp
DETAILED STEPS
PurposeCommand or Action
Creates a copy of the CoPP best practice policy.copp copy profile {strict | moderate | lenient | dense}
{prefix | suffix} string
Step 1
CoPP renames all class maps and policy maps with the
specified prefix or suffix.
Example:
switch# copp copy profile strict prefix abc
Displays the CoPP status, including the last configuration
operation and its status. This command also enables you to
(Optional) show copp status
Example:
Step 2
verify that the copied policy is not attached to the control
plane.
switch# show copp status
Displays the CoPP configuration in the running
configuration, including the copied policy configuration.
(Optional) show running-config copp
Example:
Step 3
switch# show running-config copp
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
480
Configuring Control Plane Policing
Copying the CoPP Best Practice Policy

Table of Contents

Other manuals for Cisco Nexus 9000 Series

Related product manuals