Cisco Nexus 9000 Series - Verifying the Time-Range Configuration; Additional References for IP Acls

PurposeCommand or Action
switch(config)# resequence time-range
daily-workhours 100 10
switch(config)#
number larger than the preceding rule. The difference in
numbers is determined by the increment that you specify.
Displays the time-range configuration.
(Optional) show time-range name
Example:
Step 3
switch(config)# show time-range daily-workhours
Copies the running configuration to the startup
configuration.
(Optional) copy running-config startup-config
Example:
Step 4
switch(config)# copy running-config startup-config
Verifying the Time-Range Configuration
To display time-range configuration information, perform one of the following tasks.
PurposeCommand
Displays the time-range configuration.show time-range
Displays ACL configuration, including all time ranges.show running-config aclmgr
Additional References for IP ACLs
Related Documents
Document TitleRelated Topic
Configuring TAP Aggregation and MPLS StrippingTAP aggregation
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
284
Configuring IP ACLs
Verifying the Time-Range Configuration