---------+-----------------+--------+---------+------+----+------------------
* 10 0016.5a4c.0004 secure - T F vPC Peer-Link
* 10 0016.5a4c.0005 secure - T F vPC Peer-Link
* 10 0016.5a4c.0006 secure - T F vPC Peer-Link
* 10 0016.5a4c.0007 secure - T F vPC Peer-Link
switch#
switch# show mac address-table vlan 10 (RVTEP)
Legend:
* - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC
age - seconds since last seen,+ - primary entry using vPC Peer-Link,
(T) - True, (F) - False, C - ControlPlane MAC, ~ - vsan
VLAN MAC Address Type age Secure NTFY Ports
---------+-----------------+--------+---------+------+----+------------------
C 10 0016.5a4c.0004 dynamic 0 F F nve1(67.67.67.67)
C 10 0016.5a4c.0005 dynamic 0 F F nve1(67.67.67.67)
C 10 0016.5a4c.0006 dynamic 0 F F nve1(67.67.67.67)
C 10 0016.5a4c.0007 dynamic 0 F F nve1(67.67.67.67)
Example of the show dot1x command
switch# show dot1x
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Mac-Move Deny
Example of the show dot1x all command
switch# show dot1x all
Sysauthcontrol Enabled
Dot1x Protocol Version 2
Mac-Move Deny
Dot1x Info for Ethernet1/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
HostMode = MULTI AUTH
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 1
TxPeriod = 1
RateLimitPeriod = 0
InactivityPeriod = 0
Mac-Auth-Bypass = Enabled
Dot1x Info for Ethernet1/33
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
HostMode = MULTI AUTH
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 1
TxPeriod = 1
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
209
Configuring 802.1X
Verifying the 802.1X Support for VXLAN EVPN