Cisco Nexus 9000 Series - Page 294

PurposeCommand
Displays the deny maximum flow
count, the current effective log
interval, and the current effective
threshold value.
show logging ip access-list status
Displays the ACL log running
configuration.
show running-config acllog
Displays the ACL running
configuration, including the IP
ACL configuration and the
interfaces to which IP ACLs are
applied.
This command displays
the user-configured
ACLs in the running
configuration. The all
option displays both the
default
(CoPP-configured) and
user-configured ACLs
in the running
configuration.
Note
show running-config aclmgr [all]
Displays the ACL log startup
configuration.
show startup-config acllog
Displays the ACL startup
configuration.
This command displays
the user-configured
ACLs in the startup
configuration. The all
option displays both the
default
(CoPP-configured) and
user-configured ACLs
in the startup
configuration.
Note
show startup-config aclmgr [all]
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
268
Configuring IP ACLs
Verifying the IP ACL Configuration