Cisco Nexus 9000 Series - Page 53

Before you begin
Configure RADIUS or TACACS+ server groups, as needed.
SUMMARY STEPS
1. configure terminal
2. aaa accounting default {group group-list | local}
3. exit
4. (Optional) show aaa accounting
5. (Optional) copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enters configuration mode.configure terminal
Example:
Step 1
switch# configure terminal
switch(config)#
Configures the default accounting method.
aaa accounting default {group group-list | local}
Step 2
Example:
The group-list argument consists of a space-delimited list
of group names. The group names are the following:
switch(config)# aaa accounting default group radius
• radius—Uses the global pool of RADIUS servers for
accounting.
• named-group—Uses a named subset of TACACS+ or
RADIUS servers for accounting.
The local method uses the local database for accounting.
The default method is local, which is used when no server
groups are configured or when all the configured server
groups fail to respond.
Exits configuration mode.exit
Example:
Step 3
switch(config)# exit
switch#
Displays the configuration AAA accounting default
methods.
(Optional) show aaa accounting
Example:
Step 4
switch# show aaa accounting
Copies the running configuration to the startup
configuration.
(Optional) copy running-config startup-config
Example:
Step 5
switch# copy running-config startup-config
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
27
Configuring AAA
Configuring AAA Accounting Default Methods