Cisco Nexus 9000 Series - Page 546

• show key chain name | xml
• show macsec mka session interface interface slot/port details | xml
• show macsec mka statistics interface interface slot/port | xml
• show macsec mka summary | xml
• show macsec policy name | xml
• show macsec secy statistics interface interface slot/port | xml
• show running-config macsec | xml
The following are example outputs for each of the preceding show commands:
Example 1: Displays the keychain configuration.
switch# show key chain "Kc2" | xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<nf:rpc-reply xmlns:nf="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns="http://w
ww.cisco.com/nxos:1.0:rpm">
<nf:data>
<show>
<key>
<chain>
<__XML__OPT_Cmd_rpm_show_keychain_cmd_keychain>
<keychain>Kc2</keychain>
</__XML__OPT_Cmd_rpm_show_keychain_cmd_keychain>
</chain>
</key>
</show>
</nf:data>
</nf:rpc-reply>
]]>]]>
Example 2: Displays information about the MACsec MKA session for a specific interface.
switch# show macsec mka session interface ethernet 4/31 details | xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<nf:rpc-reply xmlns:nf="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns="http://w
ww.cisco.com/nxos:1.0">
<nf:data>
<show>
<macsec>
<mka>
<session>
<__XML__OPT_Cmd_show_macsec_mka_session_interface>
<interface>
<__XML__INTF_ifname>
<__XML__PARAM_value>
<__XML__INTF_output>Ethernet4/31</__XML__INTF_output>
</__XML__PARAM_value>
</__XML__INTF_ifname>
</interface>
<__XML__OPT_Cmd_show_macsec_mka_session_details>
<details/>
<__XML__OPT_Cmd_show_macsec_mka_session___readonly__>
<__readonly__>
<TABLE_mka_session_details>
<ROW_mka_session_details>
<ifname>Ethernet4/31</ifname>
<status>Secured</status>
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
520
Configuring MACsec
XML Examples