Cisco Nexus 9000 Series - Page 552

</__readonly__>
</__XML__OPT_Cmd_some_macsec_secy_statistics___readonly__>
</__XML__INTF_ifname>
</interface>
</statistics>
</secy>
</macsec>
</show>
</nf:data>
</nf:rpc-reply>
]]>]]>
Example 7: Displays the running configuration information for MACsec.
switch# show running-config macsec | xml
!Command: show running-config macsec
!Time: Fri Jan 20 07:12:34 2017
version 7.0(3)I4(6)
******************************************
This may take time. Please be patient.
******************************************
<?xml version="1.0"?>
<nf:rpc xmlns:nf="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns="http://www.cis
co.com/nxos:7.0.3.I4.6.:configure_" xmlns:m="http://www.cisco.com/nxos:7.0.3.I4.
6.:_exec" xmlns:m1="http://www.cisco.com/nxos:7.0.3.I4.6.:configure__macsec-poli
cy" xmlns:m2="http://www.cisco.com/nxos:7.0.3.I4.6.:configure__if-eth-non-member
" message-id="1">
<nf:get-config>
<nf:source>
<nf:running/>
</nf:source>
<nf:filter>
<m:configure>
<m:terminal>
<feature>
<macsec/>
</feature>
<macsec>
<policy>
<__XML__PARAM__policy_name>
<__XML__value>am2</__XML__value>
<m1:cipher-suite>
<m1:__XML__PARAM__suite>
<m1:__XML__value>GCM-AES-XPN-256</m1:__XML__value>
</m1:__XML__PARAM__suite>
</m1:cipher-suite>
<m1:key-server-priority>
<m1:__XML__PARAM__pri>
<m1:__XML__value>0</m1:__XML__value>
</m1:__XML__PARAM__pri>
</m1:key-server-priority>
<m1:window-size>
<m1:__XML__PARAM__size>
<m1:__XML__value>512</m1:__XML__value>
</m1:__XML__PARAM__size>
</m1:window-size>
<m1:conf-offset>
<m1:__XML__PARAM__offset>
<m1:__XML__value>CONF-OFFSET-0</m1:__XML__value>
</m1:__XML__PARAM__offset>
</m1:conf-offset>
<m1:security-policy>
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
526
Configuring MACsec
XML Examples