Cisco RV130W Administration Guide

6
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 99
Configuring VPN
• Configuring Site-to-Site IPsec VPN Advanced Parameters, page101
• Configuring IPsec VPN Server, page105
• Configuring PPTP, page107
VPN Tunnel Types
You can configure VPN on your device to provide you a secure communication
channel or a tunnel between:
• Two gateway routers
• A remote client device and a gateway router
Configuring Basic Site-to-Site IPsec VPN
Your device supports site-to-site IPsec VPN for a single gateway-to-gateway VPN
tunnel. After configuring these basic VPN settings, you can connect securely to
another VPN-enabled router. For example, you can configure your device at a
branch site to connect to a router that connects site-to-site VPN tunnels at the
corporate site, so that the branch site has secure access to the corporate network.
To configure basic VPN settings for a site-to-site IPsec connection:
STEP 1 Choose VPN > Site-to-Site IPsec VPN > Basic VPN Setup.
STEP 2 In the New Connection Name field, enter a name for the VPN tunnel.
STEP 3 In the Pre-Shared Key field, enter the pre-shared key, or password, that will be
exchanged between the two routers. It must be between 8 and 49 characters.
STEP 4 In the Endpoint Information fields, enter the following information:

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %