EasyManuals Logo
Home>Cisco>Network Router>RV130W

Cisco RV130W Administration Guide

Cisco RV130W
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Viewing Device Status
Viewing the System Summary
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 13
2
Viewing the System Summary
Choose Status > System Summary to view details of your device properties,
network settings across IP address modes, firewall, wireless and VPN settings.
Click Refresh to see the latest information.
Click the underlined link to go to the related configuration window. For example, to
modify the LAN IP address, click LAN IP. The LAN Configuration window is
displayed.
The System Summary page displays information in the following sections:
System Information
Firmware Version—Current software version that the device is running.
Firmware MD5 ChecksumThe message-digest algorithm used to verify
the integrity of files.
LocaleThe language installed on the router.
Language VersionThe version of the installed language pack. The
language pack version should be compatible with the currently installed
firmware. In some cases, an older language pack may be used with a newer
firmware image. The router checks the language pack version to see if it is
compatible with the current firmware version.
Language MD5 ChecksumThe MD5 checksum of the language pack.
CPU Model—Chipset of CPU currently used.
Serial NumberSerial number of the device.
System Up Time—Length of time that the system has been running.
Current Time—Time of day.
PID VIDProduct ID and version ID of the device.
IPv4 Configuration
LAN IPLAN IP address of the device.
WAN IP—WAN IP address of the device. To release the current IP address
and obtain a new one, click Release or Renew.
Gateway—IP address of the gateway to which the device is connected (for
example, the cable modem).

Table of Contents

Other manuals for Cisco RV130W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130W and is the answer not in the manual?

Cisco RV130W Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Supported network protocolsDHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity2
Security algorithmsWEP, WPA, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, USB, WAN, WLAN
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %

Related product manuals