Cisco RV130W Administration Guide

Configuring Networking
Configuring a Mobile Network
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 25
3
Configuring a Mobile Network
Choose Networking > WAN > Mobile Network to configure to configure the
device to connect to a Mobile Broadband USB modem that is connected to its
USB interface.
Configuring Global Mobile Network Settings
To configure global settings for supported USB devices:
STEP 1 Connect the USB modem. If the modem is supported, it is automatically detected
and appears on the Mobile Network page.
STEP 2 Select Auto or Manual connection mode. Ethernet Connection Recovery works
only if the Connect Mode is set to Auto.
• To enable your modem to establish a connection automatically, select Auto
mode. If you select Auto, set a Connect on Demand time or select Keep Alive.
Connect on Demand terminates the Internet connection after it is inactive for
the period of time specified in the Max Idle Time field.
If your Internet connection is terminated due to inactivity, the modem
automatically reestablishes a connection when a user attempts to access
the Internet. In the Max Idle Time field, enter the number of minutes of idle
time that can elapse before the Internet connection terminates. Select Keep
Alive to keep the connection active at all times.
• To connect or disconnect your modem connection manually, select Manual
mode.
The device displays the current modem connection status that includes initializing,
connecting, disconnecting, or disconnected.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %