Cisco RV130W - Editing Snmpv3 Users

Managing Your Device
Configuring Simple Network Management (SNMP)
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 121
8
STEP 5 Click Save.
Editing SNMPv3 Users
You can configure SNMPv3 parameters for the two default user accounts (Admin
and Guest) for your device.
To configure SNMPv3 settings:
STEP 1 Choose Administration > SNMP.
STEP 2 Under SNMPv3 User Configuration, configure the following settings:
SysContact Enter the name of the contact person for this
device. For example, your network administrator.
SysLocation Enter the physical location of the device. For
example, Rack #2, 4th Floor.
SysName Enter a name to identify your device easily. For
example, RTR 141.
UserName Select the account to configure (admin or guest).
Access Privilege Displays the access privileges of the selected user
account.
Security Level Choose the SNMPv3 security level:
No Authentication and No Privilege—Does not
require any Authentication and Privacy.
Authentication and No Privilege—Submit only
Authentication algorithm and password.
Authentication and Privilege—Submit
Authentication and privacy algorithm and
password.
Authentication
Algorithm Server
Select the type of authentication algorithm (MD5 or
SHA).