Configuring Wireless Networks
Configuring Basic Wireless Settings
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 62
4
Configuring Basic Wireless Settings
Choose Wireless > Basic Settings to configure basic wireless settings.
To configure basic wireless settings:
STEP 1 Choose Wireless > Basic Settings.
STEP 2 In the Radio field, check the Enable box to turn on the wireless radio. By default
there is only one wireless network enabled, ciscosb1.
STEP 3 In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
WPS
Hardware
Button
Enabled Disabled Disabled Disabled
1. When using the Setup Wizard, select Best Security or Better Security to protect the
device from unauthorized access.
SSID Name ciscosb1 ciscosb2 ciscosb3 ciscosb4
B/G/N-Mixed If you have Wireless-N, Wireless-B, and Wireless-G
devices in your network. This is the default setting
(recommended).
B Only Choose this option if you have only Wireless-B
devices in your network.
G Only Choose this option if you have only Wireless-G
devices in your network.
N Only Choose this option if you have only Wireless-N
devices in your network.
B/G-Mixed Choose this option if you have Wireless-B and
Wireless-G devices in your network.
G/N-Mixed Choose this option if you have Wireless-G and
Wireless-N devices in your network.
To Next Page
Loading...
