Managing Your Device
Backing Up and Restoring the System
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 131
8
CAUTION During a restore operation, do not try to go online, turn off the firewall, shut down
the PC, or use the firewall until the operation is complete. This should take about a
minute. When the test light turns off, wait a few more seconds before using the
firewall.
Backing Up the Configuration Settings
To back up or restore the configuration:
STEP 1 Choose Administration > Backup/Restore Settings.
STEP 2 Select the configuration to back up or to clear:
STEP 3 To download a backup file based on the selected configuration option,
click Download.
Startup configuration Select this option to download the startup
configuration. The Startup Configuration is the
most current running configuration that the device
uses.
If the router startup configuration has been lost, use
this page to copy the Backup Configuration to the
Startup configuration and have all of their previous
configuration information intact.
You can download the Startup Configuration to
other RV130/RV130W devices for easy
deployment.
Mirror configuration Select this option if the device must back up the
Startup Configuration after 24 hours of operation
without any change in the startup configuration.
Backup configuration Select this option to back up the current
configuration settings.
To Next Page
Loading...
