Cisco RV130W Administration Guide

Managing Your Device
Configuring Log and E-mail Settings
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 128
8
STEP 5 In the Send E-Mail Logs by Schedule section, configure the following settings:
STEP 6 Click Save.
E-mail Encryption Choose SSL or TSL as the email encryption
method.
Choose Disable if you do not want to use an email
encryption method.
Authentication with
SMTP Server
If the SMTP (mail) server requires authentication
before accepting connections, choose the type of
authentication from the drop-down menu: None,
LOGIN, PLAIN, and CRAM-MD5.
E-mail Authentication
Username
Enter the email authentication username (for
example, logging@c ompanyname.com).
E-mail Authentication
Password
Enter the email authentication password (for
example, the password used to access the email
account you have set up to which to send logs).
E-mail Authentication
Test
Click Test to test email authentication.
Unit Choose the unit of time for the logs (Never, Hourly,
Daily, or Weekly). If you choose Never, logs are not
sent.
Day If you chose a weekly schedule for sending logs,
choose the day of the week on which to send the
logs.
Time If you chose a daily or weekly schedule for sending
logs, choose the time of day at which to send the
logs.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %