Cisco RV130W Administration Guide

Viewing Device Status
Viewing the Mobile Network Status
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 19
2
• Subnet Mask—Subnet mask of the USB device.
• Default Gateway—IP address of the default gateway.
• Connection Up Time—The length of time that link has been up.
• Current Session Usage—Volume of data being received (Rx) and
transmitted (Tx) on the mobile link.
• Monthly Usage—Monthly data download and bandwidth usage.
• Manufacturer—Card manufacturer name.
• Card Model—Card model number.
• Card Firmware—Card firmware version.
• SIM Status—Subscriber identification module (SIM) status.
• IMS—The unique identification associated with the GSM, UMTS, or LTE
network mobile phone users.
• Carrier—Mobile network carrier.
• Service Type—Type of service accessed.
• Signal Strength—Strength of the wireless mobile network signal.
• Card Status—Status of the data card.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %