Cisco RV130W Administration Guide

Configuring Networking
Configuring IPv6
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 56
3
STEP 4 Click Save.
SLA ID If you choose 6to4 as the IPv6 prefix type, enter
the Site-Level Aggregation Identifier (SLA ID).
The SLA ID in the 6to4 address prefix is set to the
interface ID of the interface on which the
advertisements are sent.
IPv6 Prefix If you choose Global/Local as the IPv6 prefix type,
enter the IPv6 prefix. The IPv6 prefix specifies the
IPv6 network address.
IPv6 Prefix Length If you choose Global/Local as the IPv6 prefix type,
enter the prefix length. The prefix length variable is
a decimal value that indicates the number of
contiguous, higher-order bits of the address that
make up the network portion of the address.
Prefix Lifetime Prefix lifetime, or the length of time over which the
requesting router is allowed to use the prefix.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %