EasyManuals Logo

Cisco RV130W Administration Guide

Cisco RV130W
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Configuring Wireless Networks
Configuring Basic Wireless Settings
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 67
4
STEP 8 In the Key Renewal field, enter the duration of time (600–7200 seconds) between
key renewals. The default value is 3600.
STEP 9 Click Save to save your settings. Click Back to go back to the Basic Settings
page.
Configuring WPA-Enterprise, WPA2-Enterprise, and WPA2-Enterprise Mixed
The WPA Enterprise, WPA2 Enterprise, and the WPA2 Enterprise Mixed security
modes allow you to use RADUIS server authentication.
WPA-Enterprise—Allows you to use WPA with RADIUS server
authentication.
WPA2-Enterprise—Allows you to use WPA2 with RADIUS server
authentication.
WPA2-Enterprise Mixed—Allows both WPA and WPA2 clients to connect
simultaneously using RADIUS authentication.
To configure the WPA Enterprise security mode:
STEP 1 In the Wireless Table (Wireless > Basic Settings), check the box for the network
you want to configure.
STEP 2 Click Edit Security Mode.
STEP 3 In the Select SSID field, choose the SSID for which to configure the security
settings.
STEP 4 From the Security Mode menu, choose one of the three WPA Enterprise options.
STEP 5 (WPA-Enterprise only) In the Encryption field, choose one of the following options:
TKIP/AES—Choose TKIP/AES to ensure compatibility with older wireless
devices that may not support AES.
AESThis option is more secure.
STEP 6 In the RADIUS Server field, enter the IP address of the RADIUS server.
STEP 7 In the RADIUS Port field, enter the port used to access the RADIUS server.
STEP 8 In the Shared Key field, enter an alphanumeric phrase.
STEP 9 In the Key Renewal field, enter the duration of time (600–7200 seconds) between
key renewals. The default value is 3600.

Table of Contents

Other manuals for Cisco RV130W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130W and is the answer not in the manual?

Cisco RV130W Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Supported network protocolsDHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity2
Security algorithmsWEP, WPA, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, USB, WAN, WLAN
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %

Related product manuals