EasyManuals Logo

Cisco RV180 Administrator's Manual

Cisco RV180
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
Configuring the Firewall
Firewall Configuration Examples
Cisco RV180/RV180W Administration Guide 102
4
Example 4: Block traffic by schedule if generated from specific range of
machines
In this example, you want to block all HTTP traffic on the weekends if the request
originates from a specific group of machines in the LAN having a known range of
IP addresses, and anyone coming in through the Network from the WAN (i.e. all
remote users).
STEP 1 Setup a schedule. Choose Firewall > Advanced Settings > Schedules.
STEP 2 Click Add.
STEP 3 Enter the schedule name (for example, “Weekend”).
STEP 4 Under Time, check All Day.
STEP 5 Under Repeat, leave Everyday unchecked.
STEP 6 Check Saturday and Sunday.
STEP 7 Click Save.
Create an outbound access rule with the following parameters:
Parameter Value
Connection Type Outbound
Action Block by Schedule
Schedule Weekend
Service HTTP
Source IP Address Range
Start starting IP address
Finish ending IP address
Destination IP Any
Rule Status Enabled

Table of Contents

Other manuals for Cisco RV180

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV180 and is the answer not in the manual?

Cisco RV180 Specifications

General IconGeneral
WAN Ports1
LAN Ports4
VPN SupportYes
Wireless SupportNo
FirewallYes
Device TypeVPN Router
VPN Tunnels10
AuthenticationMD5, SHA1
Power Supply12V DC, 1A
Encryption3DES, AES
VPN ProtocolsIPSec
Operating Temperature0 to 40 °C
Storage Temperature-20 to 70 °C
Humidity10% to 85% non-condensing
Dimensions130 x 130 x 35 mm
Weight0.28 kg

Related product manuals