Cisco SD2008T-NA User Manual

Contents
7
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Using the GUI to Configure CCX Client Roaming Parameters 20
Using the CLI to Configure CCX Client Roaming Parameters 21
Configuring Voice and Video Parameters 22
Call Admission Control 22
U-APSD 23
Traffic Stream Metrics 23
Using the GUI to Configure Voice Parameters 23
Using the GUI to Configure Video Parameters 25
Using the GUI to View Voice and Video Settings 26
Using the CLI to Configure Voice Parameters 30
Using the CLI to Configure Video Parameters 31
Using the CLI to View Voice and Video Settings 32
Configuring the Supervisor 720 to Support the WiSM 34
General WiSM Guidelines 34
Configuring the Supervisor 35
Using the Wireless LAN Controller Network Module 35
CHAPTER 5 Configuring Security Solutions 1
Cisco UWN Solution Security 2
Security Overview 2
Layer 1 Solutions 2
Layer 2 Solutions 2
Layer 3 Solutions 3
Rogue Access Point Solutions 3
Rogue Access Point Challenges 3
Tagging and Containing Rogue Access Points 3
Integrated Security Solutions 4
Configuring the System for SpectraLink NetLink Telephones 4
Using the GUI to Enable Long Preambles 4
Using the CLI to Enable Long Preambles 5
Using the CLI to Configure Enhanced Distributed Channel Access 6
Using Management over Wireless 6
Using the GUI to Enable Management over Wireless 6
Using the CLI to Enable Management over Wireless 7
Configuring DHCP Option 82 7
Configuring Access Control Lists 8
Using the GUI to Configure Access Control Lists 9
Using the CLI to Configure Access Control Lists 12
Configuring Management Frame Protection 13

Cisco SD2008T-NA Specifications

General

Brand	Cisco
Model	SD2008T-NA
Category	Extender
Language	English