Cisco SD2008T-NA User Manual

Contents
6
Cisco Wireless LAN Controller Configuration Guide
OL-9141-03
Connecting Additional Ports 41
CHAPTER 4 Configuring Controller SettingsWireless Device Access 1
Using the Configuration Wizard 2
Before You Start 2
Resetting the Device to Default Settings 3
Resetting to Default Settings Using the CLI 3
Resetting to Default Settings Using the GUI 3
Running the Configuration Wizard on the CLI 4
Managing the System Time and Date 5
Configuring the Time and Date Manually 5
Configuring an NTP Server 5
Configuring a Country Code 6
Enabling and Disabling 802.11 Bands 7
Configuring Administrator Usernames and Passwords 7
Configuring RADIUS Settings 8
Configuring SNMP 8
Changing the Default Values of SNMP Community Strings 9
Using the GUI to Change the SNMP Community String Default Values 9
Using the CLI to Change the SNMP Community String Default Values 11
Changing the Default Values for SNMP v3 Users 11
Using the GUI to Change the SNMP v3 User Default Values 12
Using the CLI to Change the SNMP v3 User Default Values 13
Enabling 802.3x Flow Control 13
Enabling System Logging 13
Using the GUI to Enable System Logging 13
Using the CLI to Enable System Logging 15
Enabling Dynamic Transmit Power Control 16
Configuring Multicast Mode 16
Understanding Multicast Mode 16
Guidelines for Using Multicast Mode 16
Enabling Multicast Mode 17
Configuring Client Roaming 17
Intra-Controller Roaming 18
Inter-Controller Roaming 18
Inter-Subnet Roaming 18
Voice-over-IP Telephone Roaming 18
CCX Layer 2 Client Roaming 19

Cisco SD2008T-NA Specifications

General

Brand	Cisco
Model	SD2008T-NA
Category	Extender
Language	English