Getting Started
Understanding Your Phone’s Lines and Buttons
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 5
1
3 LCD Screen Displays date and time, phone station name, line
extensions, and softkey options. (Not available on the
SPA501G.)
4 Line keys Indicates phone line status. (Not available on the
SPA502G.)
When lit:
Green: Line is idle.
Red (steady): Line is active or in use.
Red (blinking): Line is on hold.
Orange: Line is unregistered (cannot be used).
These keys can also be programmed by your phone
system administrator to perform functions such as
speed dial, call pickup, or monitoring an extension.
5 Softkey buttons Press a softkey button to perform the action shown on
the label on the LCD screen above.
Note: The SPA501G has the following four buttons:
Redial—Dials the last number called.
Cancel—Cancels an action (such as a transfer).
Conference—While on a call, press to start a
conference call and dial another number. After
the second party answers, press Conference
again to create the conference.
Transfer—Transfers a call. See the “Transferring
Calls” section on page 31.
6 Navigation button Press an arrow to scroll left, right, up, or down through
items shown on the LCD screen. (Not available on the
SPA501G.)
7 Messages button Press to access voice mail (must be set up by your
phone system administrator).
8 Hold button Press to place a call on hold.
#Phone Feature Description
To Next Page
Loading...
Need help?
General