Cisco SPA500 Series User Manual

Using Basic Phone Functions
Resuming a Call
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 31
3
Resuming a Call
To resume the call, press the flashing red line button for the call. (On the SPA502G,
press the resume softkey.)
Ending a Call
To end a call:
• If you are using the handset, hang up.
• If you are using the speakerphone, press the Speaker button.
• If you are using the headset, either press the Headset button (wired) or replace
the receiver (wireless).
Transferring Calls
You can perform the following types of transfers:
• Attended Transfer—You call the person to whom you are transferring the
call and either:
- transfer the call while the phone is ringing.
- wait for the person to answer before transferring the call.
• Blind Transfer—You transfer the call without speaking to the other party to
which you are transferring the call.

Cisco SPA500 Series Specifications

General

Brand	Cisco
Model	SPA500 Series
Category	IP Phone
Language	English