Installing Your Phone
Connecting a PC to Your Phone (Optional)
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 21
2
Connecting a PC to Your Phone (Optional)
To connect a PC to your phone (optional):
STEP 1 To provide network access to a PC, connect one end of an additional Ethernet
cable (not provided) to the PC port on the back of the phone body. See the
“Phone Connections” graphic.
STEP 2 Connect the other end of the Ethernet cable to the network port on your PC.
Connecting Wired and Wireless Headsets (Optional)
The IP phones support headsets from different manufacturers. For the latest
supported models, contact your reseller. Additional information can be found at
the manufacturer’s websites:
http://www.plantronics.com
http://www.jabra.com
Each brand and type of headset may require different steps for connection.
Consult the documentation for your particular headset for more information. In
general, to connect a headset:
• Wireless—Connect the headset’s telephone cord into the telephone port on
the back of the IP Phone.
• Wired headsets—Connect the 2.5mm connector from the headset into the
headset port on the right side of the IP phone as shown in the following
graphic:
To Next Page
Loading...
Need help?
General