Cisco SPA500 Series User Manual

Using Advanced Phone Features
Monitoring/Accessing Another Phone from Your Phone
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 54
4
NOTE Your phone must be part of a Cisco SPA9000 Voice Network to use this feature.
Paging Another Phone
To page another phone, dial *96 plus the extension of the phone you are paging. If
the phone you are paging is not set up to auto answer pages, the call will ring as a
normal voice call.
Configuring Auto Answer
To configure your phone to auto answer pages:
STEP 1 Press the Setup button.
STEP 2 Select Preferences.
STEP 3 Choose Auto Answer Page and press edit.
STEP 4 Press y/n to choose yes.
STEP 5 Press ok.
STEP 6 Press save.
Monitoring/Accessing Another Phone from Your Phone
Your system administrator may configure your phone so that you can monitor other
user’s phones from your phone. If this feature is configured, some line buttons on
your phone are assigned to display the status of another user’s phone. For
example, if your line 4 is configured to display Bob’s phone line, the LED color
shows you the status of his phone line:
• Green: Line is idle.
• Red (steady): Line is active or in use.
• Red (blinking): Line is ringing.

Cisco SPA500 Series Specifications

General

Brand	Cisco
Model	SPA500 Series
Category	IP Phone
Language	English