Cisco SPA500 Series User Manual

Using the SPA500S Attendant Console
Connecting the SPA500S Attendant Console to the IP Phone
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 82
6
Connecting a Second SPA500S
A maximum of two SPA500S attendant consoles can be connected to a SPA500
Series IP Phone. The instructions in this section are for connecting a second
SPA500S. If you are not attaching a second SPA500S, skip to “Configuring the
SPA500S” on page 84.
STEP 1 Attach the first SPA500S to the IP phone and connect the auxiliary cable as
described in the “Connecting the SPA500S Attendant Console to the IP Phone”
section on page 77.
STEP 2 Align the left screw hole in the first SPA500S with one of the holes on the
attachment arm.
STEP 3 Insert the pegs on the attachment arm into the peg holes on the SPA500S.
STEP 4 Using the attachment arm screw, secure the attachment arm to the first SPA500S.
STEP 5 Insert the pegs on the attachment arm into the peg holes on the SPA500S.
STEP 6 Using the attachment arm screw, secure the attachment arm to the second
SPA500S.

Cisco SPA500 Series Specifications

General

Brand	Cisco
Model	SPA500 Series
Category	IP Phone
Language	English