Using Basic Phone Functions
Setting or Changing a Phone Password
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP) 48
3
Setting or Changing a Phone Password
You can set or change the password for your phone to prevent unauthorized use.
To set a password for your phone:
STEP 1 Press the Setup button.
STEP 2 Select Set Password.
STEP 3 Enter a numeric password. Enter the same password twice.
STEP 4 Press save.
Accessing Voicemail
To access voicemail, press the Messages button on your phone. Your system
administrator should configure your phone with the correct voicemail number so
that pressing the Messages button automatically dials your voicemail system.
If you need to change the number for your voicemail (for example, if your phone is
not part of a Cisco SPA9000 Voice System and you have external voicemail),
perform the following steps:
STEP 1 Press the Setup button.
STEP 2 Scroll to Voice Mail and press select.
STEP 3 Enter the number to dial for voicemail. For a Cisco SPA9000 Voice System, this is
normally “vmm.” For an external system, enter the phone number, including any
digits you must dial to reach an outside line.
TIP To clear the field of a previous entry, press clear. To enter letters, press the Right
navigation button to scroll, then press the alpha softkey.
STEP 4 Press save.
To Next Page
Loading...
Need help?
General