Cisco UCS B200 M5 User Manual

If you configure the License Server host's firewall to permit remote access to the License Server, the
management interface is accessible from remote machines at the URL http://localhost:8080/licserver.
Reading Your License Server's MAC Address
Your License Server's Ethernet MAC address is used as an identifier when registering the License Server with
NVIDIA's Licensing Portal.
Procedure
Step 1
Access the GRID License Server Management Interface in a browser.
Step 2
In the left-side License Server panel, select Configuration.
Step 3
In the License Server Configuration panel, from the Server host ID pull-down menu, select your License
Server's Ethernet MAC address.
It is important to use the same Ethernet ID consistently to identify the server when generating licenses
on NVIDIA's Licensing Portal. NVIDIA recommends that you select one entry for a primary,
non-removable Ethernet interface on the platform.
Note
Installing Licenses From the Licensing Portal
Procedure
Step 1
Access the GRID License Server Management Interface in a browser.
Step 2
In the left-side License Server panel, select Configuration.
Step 3
From the License Server Configuration menu, click Choose File.
Step 4
Browse to the license .bin file that you generated earlier and want to install, and click Open.
Step 5
Click Upload.
The license file installs on your License Server. When the installation is complete, you see the confirmation
message, "Successfully applied license file to license server."
Viewing Available Licenses
Use the following procedure to view the licenses that are installed and available and their properties.
Cisco UCS B200 M5 Blade Server Installation and Service Note
58
NVIDIA Licensing Information
Reading Your License Server's MAC Address

Cisco UCS B200 M5 Specifications

General

Brand	Cisco
Model	UCS B200 M5
Category	Server
Language	English