Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 124

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the Administration Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 124
5
Configuring Management Settings
The Administration > Management window displays the settings for configuring
the password and Simple Network Management Protocol (SNMP) for the router.
To configure management settings for the router, follow these steps:
STEP1 Click Administration > Management.
STEP 2 Configure the management settings for the router:
• Router Access—This section configures the administrator user accounts to
manage the wireless router through the web-based utility. Only the first user
is created by default. Other accounts are not created by default so you can
leave them alone.
NOTE Make sure to change the first user account username and password
when you configure your router for the first time.